FS50 SERIES PHOTOELECTRIC SENSOR |
||||
Opposed mode: | sn=20m / 40m | |||
Diffuse mode: | sn=100mm-400mm / 20cm-1m / 20cm-1.8m / 30cm-2m | |||
Retroreflective mode: | sn=10m | |||
Polarized reflective mode: | sn=6m | |||
House size: | 50x50x18mm |
FS50 SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(DC) | ||||
SENSING MODE/ ITEM |
DC |
|||
Through-beam mode
|
Diffuse mode |
Retro-reflective mode |
Polarized reflective mode |
|
Nominal Voltage | 10-30VDC |
|||
Residual Ripple | <10% |
|||
Tolerance | ¡À10%Sn |
|||
Hysteresis | 10% |
|||
Emission | ...............................................................Infrared(880nM) |
red(660nM) |
||
Output | NPN or PNP (programmable) |
|||
Contact | NO or NC (programmable)......... |
|||
Max. Output Current | 200mA |
|||
Absorption At 30VDC | 40mA |
|||
Voltage Drop(Sensor On) | <2.0V(I=100mA) |
|||
Yellow LED | Output indicator |
|||
Green LED | Supply indicator |
|||
Sensitivity Adjustment | Trimmer 1 tum |
|||
Switching Frequency | 200 Hz |
|||
Response Time | 5mS |
|||
Start Up Delay | 100mS |
|||
Short Circuit Protection | Yes |
|||
Electric Protections | Yes |
|||
Temperature Limits | -10 ~ +60¡æ |
|||
Light Immunity | >10.000Lux |
|||
Protection Degree | IP65 |
|||
Cable Length | 2m(4x0.25mm2) |
|||
Connect | Euro style |
|||
Sensing object | - |
white paper |
Reflectors D83 |
|
EMC | IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>10V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact) |
|||
Voltage Withstand Ability | IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure |
|||
Insulation Resistance | >20M , With 500v dc megger between all supply terminals connected together and enclosure |
|||
Vibration Resistance | IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min |
|||
Shock Resistance | IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each |
|||
Weight-cable output-(connector) | -160g-(120g) |
FS50 SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(AC/DC) | ||||
SENSING MODE/ ITEM |
AC/DC |
|||
Through-beam mode
|
Diffuse mode |
Retro-reflective mode |
Polarized reflective mode |
|
Nominal Voltage | 12-240VDC / 24-240VAC |
|||
Mains Frequency | 50/60Hz |
|||
Tolerance | ¡À10%Sn |
|||
Hysteresis | 10% |
|||
Emission | ...............................................................Infrared(880nM) |
red(660nM) |
||
Output | Relay SPDT |
|||
Max. Output Current | 3A/30V AC, 1A/220V AC |
|||
Power consumption | <2.5VA |
|||
Yellow LED | Output indicator |
|||
Green LED | Supply indicator |
|||
Sensitivity Adjustment | Trimmer 1 tum |
|||
Switching Frequency | 10 Hz |
|||
Response Time | 20mS |
|||
Start Up Delay | <300mS |
|||
Temperature Limits | -10 ~ +60¡æ |
|||
Light Immunity | >10.000Lux |
|||
Protection Degree | IP65 |
|||
Cable Length | 2m(5x0.30mm2) |
|||
Connect | Euro style |
|||
Sensing object | - |
white paper |
Reflectors D83 |
|
EMC | IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>10V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact) |
|||
Voltage Withstand Ability | IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure |
|||
Insulation Resistance | >20M , With 500v dc megger between all supply terminals connected together and enclosure |
|||
Vibration Resistance | IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min |
|||
Shock Resistance | IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each |
|||
Weight-cable output-(connector) | 180g (125g) |
FS50 SERIES PHOTOELECTRIC SENSORS CONNECTION DIAGRAM | ||
Wiring diagrams(DC) | Emitter(DC) | |
__ | ||
Connection with connector (DC) | ||
_____ | ||
Wiring diagrams(AC/DC) | Emitter(AC/DC) | |
__ | ____ | |
Connection with connector (AC/DC) | ||
__ |
FS50 SERIES PHOTOELECTRIC SENSORS DIMENSIONS (unit:mm) |
___ |
Accessories |
SKY-E @ Copyright (C) 2005 All Rights Reserved |